Here at profire we offer protection piece of mind

Fire alarms/systems (BS5839 - 1/6)

From initial survey through to design, installation and service and maintenance - the One Stop Shop for all your fire alarm systems. Profire can provide a full range of services including system design, installation, commissioning and servicing.

Profire have a long held belief that the customer should never be tied to a single source service provider. To this end we have adopted an ‘Open Protocol’ philosophy for our product range in fire detection.

Profire design, supply, install and commission analogue addressable and non-addressable fire alarm systems, including the latest wireless systems from hyfire and apollo.

These systems may be cabled or wire free depending on the particular circumstances of any given building. We also specialise in listed buildings and premises that may have special considerations.

To run the field devices a control panel is required. Profire have extensive expertise in Advanced Electronics, Kentec, Ctec, Ziton and many more to enable the most up to date control panels to be utilised as part of your systems.

Portable Fire Extinguishers (BS5306)

Regular servicing is essential for Fire Safety products such as Fire Extinguishers. British Standard Code of Practice (BS5306 Part3) recommends that Fire Extinguishers are serviced at least annually to ensure that they will operate properly should an emergency occur. Fire Extinguishers will provide many years of reliable fire protection if they are properly maintained and regularly serviced by our competent engineers. Profire engineers will provide fire extinguisher servicing on a regular basis to ensure your equipment is ready for the moment that you really need it.

Extinguishers in commercial or public buildings should be visually inspected monthly for damage and must be serviced to BS 5306 - Part 3 once a year. Water, foam, wet chemical and powder extinguishers require test discharged every five years. Co2 extinguishers must be refurbished after ten years.

At Profire our engineers are trained to service all types of fire extinguishers. If you have a mixed range of extinguishers, no matter the manufacturer, Profire is the company for you! 

Emergency Lighting (BS5266)

Profire are fully qualified to test emergency lighting & carry out maintenance work. We’re also able to work with other teams to design & install new emergency lighting systems. If you need emergency lighting tested in the uk please get in touch

The reasons for buildings requiring emergency lighting may be obvious, but its importance cannot be understated. Property owners & managers should be aware that emergency lighting for commercial premises is a legal requirement in the UK and it must comply with BS 5266-1 2016. In order to maintain compliance, all emergency lighting systems need to be tested periodically.

If you are in any doubt regarding the compliance of your emergency lighting, please contact us. We’ll be happy to assess your current system, carry out a test and advise if there’s any work required to ensure you are legally complying with BS5266.

Alternatively, if you just need your emergency lighting to to to be tested by a company that’s both professional & affordable, please get in touch.

Safety Signage (BS5499)

Clear guidance and direction will save lives in a fire emergency. Fire signage is therefore a vital part of fire evacuation procedures, and is also a key part of your compliance as a business with The Regulatory Reform (Fire Safety) Order 2005. Here at Profire, we supply a wide range of fire safety signs from leading brands  and these include: 

  • Fire exit signs/fire escape signs – Often green, they indicate a safe route, including the direction of travel
  • Fire equipment signs – Red in colour in line with the equipment they relate to
  • Health and safety signs – Blue signs featuring white text to offer mandatory precautions
  • Warning signs – Yellow, triangular and convey immediate hazards and fire risks

Other signage includes fire action notice signs, keep clear signs, safe condition signs and fire assembly point signs. 

All our fire exit signs and fire signage systems adhere to BS 5499-10:2014 for the selection and usage of signs and they also comply with BS EN ISO 7010:2019 for the graphics and colouring. This means you have signs positioned in appropriate locations and complying with the relevant standards.

© Copyright profire safety solutions. All rights reserved.

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details and accept the service to view the translations.